Tires/Tubes

- THE FAT BIKE TIRE. - Extremely light. - The large volume can be ridden with extremely low air pressure. - Ideal on deep soils, rough and very loose terrain. - Available in widths of 100, 110 or 120 millimetres

LIGHTER, GRIPPIER, FASTER. The ‘turbo’ of spike tires. With up to 402 spikes it bites firmly into icy roads. The tungsten carbide core of each spike is clad in weight-saving aluminum. The tire remains agile and sporty. Brand new studded tires must be ridden around 40km on asphalt roads without heavy acceleration and braking. This 'bed-in period' will ensure studs are fully set, after which, the studded tires can be used normally. - Lighter, grippier, faster - The ''Turbo'' of spike tires - Agile and sporty - Please note, in order to ensure that spikes are permanently fixed, tires should be run in for about 40km (25 miles) on asphalt, while avoiding any fast acceleration or heavy braking.

Developed alongside World Cup mechanics and world champion racers. Peaty’s Holeshot Tubeless Sealant is packed full of biodegradable fibres & sealing particles to give a fast and strong seal. Using the latest fast-acting latex, our water-based sealant is ammonia-free, non-hazardous and lasts up to 6 months in the tyre in temperate climates*. It won’t ball up in the tyre and is easily washed out. Our biodegradable fibres and particles bind together with the fast-acting latex to create a clot (like platelets in your blood) to quickly & effectively seal holes and tears up to 6mm. Key Features: - Biodegradable sealing fibres - Biodegradable platelets - CO2 compatible - Seals up to 6mm holes - Operating pressures: 15 to 120 psi - Operating temperature: -20°c to +50°c - Seals porous tyres and bead/rim gaps setup Setup Instructions: Always ensure you have tubeless ready rims and tyres. For best results use with Peaty’s Tubeless Rim Tape and Peaty’s Tubeless Valves. 1. Shake the bottle vigorously before every use to ensure an even distribution of fibres and particles. 2. Rinse away any old sealant from the tyre and dry off completely. For brand new tyres degrease, rinse and dry the internal carcass to remove factory mold release agents and other contaminants. 3. Seat your tyre onto the rim and inflate initially with no sealant, using a track pump, inflator or compressor to pop the tyre bead fully onto the rim. 4. Deflate the tyre and, with the valve at the three o’clock position, use the flexible injector pipe provided to inject the desired amount of sealant directly through the de-cored valve. 5. Re-insert the valve core and re-inflate the tyre to desired pressure. 6. Distribute the sealant around inside the tyre by spinning the wheel and tapping the tyre on the floor. 7. Listen for any air leaks and orientate the wheel so that the sealant flows around the inside of the tyre to the area required. Continue doing this until you can’t hear any more air loss † 8. Wash away any excess sealant that may have found its way to the outside of the tyre or rim with water. 9. Check tyre pressures and ride! Recommended minimum quantities per tyre: - Road 30 - 45ml - CycloCross 60 - 75ml - 26” MTB 60 - 80ml - 27.5” MTB 70 - 90ml - 29” MTB 100 - 120ml For wider rim / tyre combinations and / or additional puncture protection we recommend adding up to 30ml more sealant to the above quantities * Always check sealant regularly and top up as required † If a seal can’t be made, add more sealant in increments as required

THE FAT BIKE TIRE. - Extremely light. - The large volume can be ridden with extremely low air pressure. - Ideal on deep soils, rough and very loose terrain. - Available in widths of 100, 110 or 120 millimetres

CushCore TRAIL provides an all-new option for riders looking for a performance/weight balance between our PRO and XC inserts. Additionally, CushCore TRAIL was engineered to provide more progressive sidewall support: the harder you push, the more support you’ll feel. Enabling supple tire response on flat corners and a stable sidewall when railing berms. Like all CushCore tire inserts, TRAIL absorbs shock and vibration, improves cornering, and prevents flats/rim damage … giving you Total Confidence to ride at your best.

CushCore TRAIL provides an all-new option for riders looking for a performance/weight balance between our PRO and XC inserts. Additionally, CushCore TRAIL was engineered to provide more progressive sidewall support: the harder you push, the more support you’ll feel. Enabling supple tire response on flat corners and a stable sidewall when railing berms. Like all CushCore tire inserts, TRAIL absorbs shock and vibration, improves cornering, and prevents flats/rim damage … giving you Total Confidence to ride at your best. Tire Widths: 2.1"-2.6" Inner Rim Width: 22mm-35mm Includes: (2) CushCore tire inserts, (2) 44mm CushCore presta air valves, valve core tool, installation instructions, and rim stickers.

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert, allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 33 – 46mm and inner rim widths 19 – 26mm Includes - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.6 – 3.0" and rims with internal width 32 – 45mm Includes - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm Includes: - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert, allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 1.8" to 2.4" and inner rim widths 22mm to 32mm Includes - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

- The favourite among downhill and enduro experts. - The perfect choice for virtually any track. - Intermediate tread: maximum brake traction and corner grip even on extremely muddy terrain thanks to strong shoulder studs and the aggressive, open tread design.

Guaranteed Grip and Control In All Situations - Radial carcass allows for a larger contact patch and conforms to terrain yielding more grip, more comfort, and more control - Literally sticks to the ground as the tire deforms more precisely - Tread Pattern optimized for radial carcass: Many lugs for maximum grip and great durability - Control in all situations

The fastest downhill tire in the world! - Developed over two years in the World Cup races, including with DH overall World cup winner Amaury Pierron - Optimized 100% for precision - For even more aggressive cornering, shoulder lugs are 10% more stable compared to the Magic Mary - Long braking edges allow later braking point - Open shoulder area provides direct feedback and improves self-cleaning - Ramps on center lugs for optimal rolling characteristics - Evolution line, Super Downhill construction - Addix Ultra Soft compound - ECE: E-50 - 1320g

The Shredda Rear tire was designed for the steepest uphill passages. A new Radial carcass allows for a larger contact patch and conforms to terrain yielding more grip, more comfort, and more control to keep you on the trail. - Radial carcass allows for a larger contact area: more grip, more comfort, and more control - Almost sucks itself to the ground because the tire deforms so precisely - Slightly shallower tread depth than Shredda Front, but more stable profile optimized for radial carcass: Open tread design with scooping effect and high tread depth for excellent interlocking - Especially on soft surfaces, it generates a lot of braking and propulsion traction

The Shredda Front tire was designed for the steepest uphill passages. A new Radial carcass allows for a larger contact patch and conforms to terrain yielding more grip, more comfort, and more control to keep you on the trail. - Literally sticks to the ground as the tire deforms more precisely at specific points - Profile optimized for radial carcass: Open tread design with high tread depth for excellent traction especially on soft surfaces - Radial carcass tires offer approximately 30% more contact area than conventional tires at the same air pressure. Even if the air pressure is increased by 50%, the contact area is still 15% larger - The carcass material overlaps for a shorter time and with less tension. As a result, the tire deforms more selectively and can react much more flexibly and adaptably to unevenness without sacrificing control - The increased contact area and the more flexible response behavior provide significantly more grip, more damping, more control and more comfort

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

- For Trail and Cross Country - Extremely versatile all-round tire - Has larger side lugs for cornering performance - Fast rolling and lots of traction - Available in Super Ground, Super Trail, and Twinskin construction - Available in Addix Speedgrip, Addix Performance, and Addix Super Race compounds

Experience the Radial Revolution! Guaranteed grip and control in all situations. - Radial carcass allows for a larger contact patch and conforms to terrain, yielding more grip, more comfort, and more control - Literally sticks to the ground as the tire deforms more precisely - Tread pattern optimized for radial carcass: many lugs for maximum grip and great durability - TRAIL PRO version (Evo line) - Addix Ultra Soft compound - E-bike: E-50 - 1110g

Big Betty is back! Equipped with everything modern tire technology has to offer. A Downhill and Enduro Allrounder for dry to damp conditions. Big Betty works perfectly on the rear wheel when combined with our much-loved Magic Mary. - Long supported braking edges for maximum braking traction - Extremely stable shoulder blocks for outstanding cornering grip - Open and aggressive tread for excellent grip and self-cleaning - Evolution line, NEW Super Trail construction - Addix Soft compound - ECE: E-50 - 1300g

The MTB tire with the greatest range of applications. The all-rounder that works in every situation, no matter the weather, no matter the terrain. Widest possible range of use: for tour and all-mountain, for difficult cross-country tracks as well as technically challenging enduro trails. The Nobby Nic got a revised tread design this season: - Modern trail bike tread with stable shoulder blocks for even more traction - Enlarged gaps between blocks for better self-cleaning - Outstanding braking and forward traction due to special center stud arrangement - Performance Line, Twinskin - ECE: E-50 - 960g

The MTB tire with the greatest range of applications. The all-rounder that works in every situation, no matter the weather, no matter the terrain. Widest possible range of use: for tour and all-mountain, for difficult cross-country tracks as well as technically challenging enduro trails. The Nobby Nic got a revised tread design this season: - Modern trail bike tread with stable shoulder blocks for even more traction - Enlarged gaps between blocks for better self-cleaning - Outstanding braking and forward traction due to special center stud arrangement - Evolution line, NEW Super Ground construction - Addix SpeedGrip compound - ECE: E-50 - 850g

- Specifically developed for the rear wheel, but will make a good front tire too - Very fast and versatile XC tread - Great traction - Excellent acceleration - Outstanding rolling properties - Addix Speed Compound: Speed, stability, and durability

- Specifically developed for the front wheel - Extra-aggressive XC tread - Precise steering behavior - Reliable cornering when riding at the limit - Sporty handling and direct feedback - High braking performance in all conditions - Addix Speedgrip compound: Speed, grip, and durability

The perfect choice for XC races where every (tenth of a) second counts. - Developed in collaboration with Olympic silver medalist Mathias Flückiger - Combines grip and low rolling resistance like no other Schwalbe XC tire - Reinforced transition area between center and shoulder blocks for optimal SnakeBite protection - Closes the gap between Racing Ralph and Thunder Burt, as it is faster than Racing Ralph and provides more grip than Thunder Burt - XC PRO version (Evo line) - Addix SpeedGrip compound - E-bike: E-25

The Rocket Ron is a super lightweight competition tire with incredible grip, good self-cleaning and low rolling resistance. - Incorporates Evo-Carcass, U-Blocks and PaceStar Triple Compound - Incredible grip with extremely low weight

Schwalbe Pro One Road Tire is a fast, reliable, and light tire. the Pro One remains controllable at all times - on the fastest descents, in extreme cornering, in all conditions. - Minimal rolling resistance - All-around cut resistance and puncture protection - ISO Diameter: 622 / road / 29" - Tire Intended Use: Road - Tire Type: Clincher Tire - Type: Folding - Tire Diameter: 700c - Weight: 215g - Pressure: 6.0-10.0 Bar (85-145 psi) - Maximum load: 70 kg ADDIX Race Compound Offers tenacious grip at high cornering speeds and extensive durability in E-operation. Evolution Line The very best possible. Highest grade materials. Latest technology. V-Guard Extremely lightweight and cut-resistant high-tech fabric. Soupless Carcass Souplesse Carcass Construction Special turn-up construction for an exceptional riding experience in race tires.

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

Experience the Radial Revolution! Guaranteed grip and control in all situations. - Radial carcass allows for a larger contact patch and conforms to terrain yielding more grip, more comfort, and more control - Literally sticks to the ground as the tire deforms more precisely - Tread pattern optimized for radial carcass: many lugs for maximum grip and great durability - TRAIL PRO version (Evo line) - Addix Soft compound - E-bike: E-50 - 1180g

THE RACE GRAVEL TIRE The G-One R is made for use in light terrain, on gravel roads, and on asphalt. - Angled side knobs work together with the Super Race carcass to create the best cornering grip - Souplesse construction for a particularly smooth ride with low rolling resistance and high puncture protection thanks to V-Guard - New boomerang profile for the best uphill traction and ideal rolling behavior - PRO (Evo) line - E-25 - 610g

The G-ONE RX Pro completes the R PRO line, delivering top performance even on rough surfaces. With its new aggressive tread design you will have better control for higher speeds on loose ground, rocky gravel and muddy trails. The boomerang elements in the center ensure smooth rolling. The intermediate knobs offer strong support under load while traction and stabilization for fast corners and challenging tracks are provided by the outer blocks. The RX combines the best features of the G-One R and the X-One R and provides you with a new level of off-road experience: the center lugs of the G-One R roll comfortably even on asphalt and offer low rolling resistance, while the side lugs ensure a secure grip even on demanding surfaces. Thanks to the new ADDIX Race Compound, the RX not only offers outstanding traction, but also minimal rolling resistance. The prominent central and outer lugs give you the grip you need for fast corners and demanding tracks. - Self-cleaning tread: Leave the mud behind and go full throttle - Maximum grip: Reinforced side lugs for improved grip in bends and solid center lugs for perfect brake transmission and grip off-road - Pure stability: Long outer lugs ensure absolute control in every corner

Argotal is the ideal tire for loose terrain, with cornering stability and increased side-grip. The open tread pattern allows for self-cleaning so you can push your riding limits through dust and loam. - Supported in-line shoulder studs with supportive structure for high stability even when cornering aggressively to provide high mechanical grip especially in loose soils - Open tread pattern design for perfect interaction on loose surfaces with good self-cleaning in moist and wet conditions - The pronounced studs are equipped with steep ramps in order to generate mechanical grip through a pattern-soil interaction for expectational grip in on loose and mixed surface - Downhill Casing features a durable and reinforced carcass construction with supple and vivid characteristics - Soft-Compound offers a balance of grip and rolling resistance for gravity focused use cases. A high level of grip with a reasonable rolling resistance for optimized rolling properties Enduro or Trail riding - E25 e-bike rating features a high quality structure with puncture protection to reduce premature wear brought about by the additional driving force

Kryptotal Rear tire is optimized for the rear wheel; this all around tire balances stability of grip, traction for braking and rolling resistance. Ideal for mixed terrain conditions for you to push your limits in trail, enduro or downhill gravity riding. - Carcass construction is robust and impervious against damage and penetration from foreign objects, resulting in a versatile, low weight and an attractive design - Pair with Kryptol Front tire for optimum use - Downhill Casing features a durable and reinforced carcass construction with supple and vivid characteristics - Soft-Compound offers a balance of grip and rolling resistance for gravity focused use cases. A high level of grip with a reasonable rolling resistance for optimized rolling properties Enduro or Trail riding - E25 e-bike rating features a high quality structure with puncture protection to reduce premature wear brought about by the additional driving force

The Xynotal tire provides control over hardpack, rocky surfaces. With low rolling resistance and contact edges for improved traction and braking, you can enjoy a fast gravity ride with the confidence of continuous grip when you need it most. - Carcass construction is robust and impervious against damage and penetration from foreign objects, resulting in a versatile, low weight and an attractive design - Downhill Casing features a durable and reinforced carcass construction with supple and vivid characteristics - Soft-Compound offers a balance of grip and rolling resistance for gravity focused use cases. A high level of grip with a reasonable rolling resistance for optimized rolling properties Enduro or Trail riding - E25 e-bike rating features a high quality structure with puncture protection to reduce premature wear brought about by the additional driving force

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

BIG BETTY IS BACK! Equipped with everything modern tire technology has to offer. A Downhill and Enduro Allrounder for dry to damp conditions. Big Betty works perfectly on the rear wheel when combined with our much-loved Magic Mary up front. - For Downhill and Enduro - Long, supported brake edges - Extra-strong shoulder knobs - Good self-cleaning properties

Equipped with everything modern tire technology has to offer. A Downhill and Enduro Allrounder for dry to damp conditions. Big Betty works perfectly on the rear wheel when combined with the much-loved Magic Mary. - Long supported braking edges for maximum braking traction - Extremely stable shoulder blocks for outstanding cornering grip - Open and aggressive tread for excellent grip and self-cleaning

- The next generation of tubeless tires. A truly thrilling ride. It's fast. It's reliable. It's light. - The patented MicroSkin construction makes this all possible. The rolling resistance is minimal! - All around cut resistance and puncture protection are extraordinary. - This is the absolute top model from Schwalbe! - The Schwalbe One Pro can also be used with a normal tube, but its true strengths are experienced only in tubeless form.

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

Judge with SG1 is our rowdiest and toughest rear-focused tire. Centerline knobs alternate between long and wide to provide the hard braking traction and efficiency required of a rear tire. Burly outer knobs provide support and dig in to keep you glued threw off-camber corners. Judge features a flatter tire profile than most other tires, which makes it easier to reach the outer knobs when cornering. The Judge keeps everything in order, whether dry and loose or wet and sloppy. SG1 puncture protection runs under the tread cap and has extended bead protection. Big Knobs, Big Sipes Massive knobs in every area of the tread prove that the Judge prioritzes traction above all else. Long, thick knobs till through rocky terrain without folding under heavy cornering forces. Each knob features full-length siping to essentially double the amount of knob edges contacting the trail. Flat-Top Profile The side-to-side tread arc of the Judge is "flatter" than most tires, which results in the side knobs engaging sooner while cornering compared to a tire with a rounder profile. This allows the side knobs to dig into the terrain quicker and deeper, which improves cornering traction on loose, off-camber trails. Rear-Focused Design Judge features wide, blocky knobs that maximize braking traction and improve the longevity of the tire. The side knobs overhang the sidewall of the tire to protect it from slashes while you're steering with the rear. We suggest pairing the Judge with a Verdict 2.5 or Vigilante 2.5 on the front. TCS Tubeless-Ready TCS (Tubeless Compatible System) is WTB's standardized tubeless system. These tires feature a TCS tubeless-ready casing, which nearly eliminates flats and allows lower tire pressures to improve traction and comfort over a traditional tube-type tire.

Judge with SG1 is WTB's rowdiest and toughest rear-focused tire. Centerline knobs alternate between long and wide to provide the hard braking traction and efficiency required of a rear tire. Burly outer knobs provide support and dig in to keep you glued threw off-camber corners. Judge features a flatter tire profile than most other tires, which makes it easier to reach the outer knobs when cornering. The Judge keeps everything in order, whether dry and loose or wet and sloppy. SG1 puncture protection runs under the tread cap and has extended bead protection. - Massive knobs in every area of the tread prove that the Judge prioritizes traction above all else. Long, thick knobs till through rocky terrain without folding under heavy cornering forces. Each knob features full-length siping to essentially double the amount of knob edges contacting the trail. - The side-to-side tread arc of the Judge is "flatter" than most tires, which results in the side knobs engaging sooner while cornering compared to a tire with a rounder profile. This allows the side knobs to dig into the terrain quicker and deeper, which improves cornering traction on loose, off-camber trails. - Judge features wide, blocky knobs that maximize braking traction and improve the longevity of the tire. The side knobs overhang the sidewall of the tire to protect it from slashes while you're steering with the rear. WTB suggests pairing the Judge with a Verdict 2.5 or Vigilante 2.5 on the front. - TCS (Tubeless Compatible System) is WTB's standardized tubeless system, which nearly eliminates flats and allows lower tire pressures to improve traction and comfort over a traditional tube-type tire - SG1 puncture protection runs beneath the entire tread cap making the tire more resilient against sharp objects lurking in the dirt, combined with Inner Peace + technology, tripling the height of it’s apex bead protection for SG1. This enhancement not only shields the tire bead from damage, but also significantly bolsters the sidewall structure - An updated High Grip compound not only increases tread longevity, but also improves grip at the same time, especially in wet conditions - TriTec blends three distinct rubber compounds to provide different levels of traction, support and durability based on their placement within the tread. High durometer rubber provides a foundation for the entire tread pattern and even extends slightly into the base of each knob to provide additional support below the softer compounds used in the remainder of each knob. Center knobs feature a medium durometer compound to provide traction and durability without sacrificing rolling efficiency, while outer knobs feature the softest compound for maximum grip and slow rebound characteristics - TCS Tough Casing features two full layers of casing span bead-to-bead to ensure every surface of the tire is more resistant to punctures, provides additional sidewall support while cornering and increased traction by running lower pressures than would be possible with thinner, single-ply casings. TCS Tough tires are the sure bet for aggressive trail, enduro, gravity, and e-bike riders who want ultimate peace of mind out on the trail

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

The legendary High Roller returns with an all-new hybrid tread design, but the same old winning ways! Developed with extensive input and testing from Maxxis' World Cup athletes, the third generation of the High Roller is built to take on mixed conditions at high speeds - The third gen High Roller slots into the Maxxis gravity range between the Assegai and the Shorty - Widely-spaced tread clears debris better than the Assegai and it performs better in drier conditions compared to the Shorty - Built to take on mixed conditions at high speeds - Center tread uses a mid-spike design similar to the Shorty but with a lower knob height - Knobs provide excellent soil penetration in soft, loose, or dusty conditions while remaining stable enough to prevent squirm on hard surfaces - Cornering traction is enhanced via large, well-supported side knobs for predictable handling - A versatile choice when conditions are soft or loose, but don’t quite warrant a mud spike - All Maxxis tires 2.40" and up are considered WT according to Maxxis whether or not they are labeled WT - 3C MaxxGrip: the ultimate in grip and slow rebound properties for unparalleled traction in downhill applications - DD: Designed for Enduro racing and ebike use. Two layers of lightweight 120 TPI casing material are combined with a butyl sidewall insert to create a highly durable tire with more trail feedback than a Downhill casing tire - TR: Tubeless Ready means the ability to run lower pressures, improving traction, lowering rolling resistance, and less chance of flatting - Recommended installation: Front or rear - Tire Diameter: 29" - ISO Diameter: 622 / Mountain / 29er - Labeled Size: 29 x 2.4" - Casing: 60tpi - Max Pressure: 50psi - Bead: folding - Weight: 1,299g. (29 x 2.4")

The legendary High Roller returns with an all-new hybrid tread design, built to take on mixed conditions at high speeds. The center tread uses a mid-spike design similar to the Shorty but with a lower knob height. These knobs provide excellent soil penetration in soft, loose, or dusty conditions while remaining stable enough to prevent squirm on hard surfaces. Cornering traction is enhanced via large, well-supported side knobs for predictable handling. - Recommended for intermediate enduro and downhill conditions - Tubeless ready construction, designed for front or rear use - A versatile choice when conditions are soft or loose, but don’t quite warrant a mud spike - Widely-spaced tread of the High Roller clears debris better than the Assegai and it performs better in drier conditions compared to the Shorty - 3C MaxxGrip + Downhill casing is ideal for Downhill racing and long travel e-bikes - 3C MaxxGrip compound uses the stickiest, slowest rebounding rubber offered by Maxxis to provide lots of traction on the trail - Downhill casing tires are designed for extreme use in all gravity applications, made with two layers of durable 60 TPI casing material along with a large butyl rubber insert that extends from each bead into the sidewall

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims - DH casing features 2 ply 60 TPI construction with a butyl reinforced sidewall for maximum durability With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The DHR II is the gold standard for riders wanting maximum traction and cornering grip when trail conditions get loose and muddy. - Ramped paddle-shaped center knobs roll efficiently and provide excellent traction for climbing and braking - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium - 3C MaxxTerra is an intermediate triple compound that provides additional grip but still retains excellent tread wear and rolling resistance qualities - Downhill casing tires are designed for extreme use in all gravity applications, made with two layers of durable 60 TPI casing material along with a large butyl rubber insert that extends from each bead into the sidewall

- For a safer journey. You have full control on icy roads with the Marathon Winter Plus. - For best possible puncture protection, it comes with a SmartGuard layer. - Spikes work best on ice at the minimum pressure - At max pressure, noise is reduced to a minimum on ice-free roads.

It's all in the name. Trail Boss is at home on...well...trails! A true all-arounder, the Trail Boss will instantly feel at home on your local singletrack. This is the tread of choice for many in the WTB office. Want to go out and own it? Be a Trail Boss. - Tightly spaced, blocky tread minimizes rolling resistance until braking allows the knobs to truly dig in - Supportive side knobs deliver traction when trying to keep the bike upright on off-camber surfaces - Commonly used as a rear tire with a WTB Vigilante on the front

Aggressive, premier and unwavering...those were words we used to describe the highly esteemed Vigilante 2.3, and they still ring true for these wider brethren. We simply dreamt of ripping trails on wider versions of our favorite aggressive mountain tire. We wouldn't hand you spineless claims about vast improvements unless they were true. The new Vigilante has received a substantial increase in both the height and surface area of the side knobs. Tall, stout outer knobs not only dig deeper, but also start digging sooner in the initial stages of cornering. Wider, taller, and more aggressive in every way: the new Vigilante. TriTec And Slash Guard: All Vigilante tires feature TriTec Compound, which utilizes three rubber compounds to provide different levels of traction, support, and durability based on their placement within the tread. The entire tread pattern is supported by a base of high-durometer rubber, which also transitions halfway into the height of the knobs and allows for the use of softer knob compounds without the tire folding under cornering forces. The top of the center knobs consist of a medium-durometer compound to provide traction and durability without sacrificing rolling efficiency, while the outer knobs feature the softest compound to deliver maximum grip and slow rebound. All TCS Light versions of the new WTB tires feature Slash Guard technology, which incorporates a protective nylon insert spanning the entire sidewall to provide extra protection without the weight of a dual-ply TCS Tough casing. - Square-lugged knobs deliver unwavering traction, yet benefit from added height to ensure they dig even deeper into loose, unpredictable terrain. - Updated siping arrangement places emphasis on cornering forces, while the larger knobs don't discriminate against shamelessly forceful cornering or reckless braking. - Increased circumferential spacing allows the tread to remain clear in sloppy conditions, while still keeping the casing protected from spiteful rocks. - Vigilante is optimized for use with i29 rims.

CushCore E-MTB is specifically designed for the increased weight and forces of an E-mountain bike. With maximum impact protection and durability, you’ll ride more laps, with less fatigue, and less worry. As our customers say, “It’s a no-brainer for E-MTBs.”

CushCore E-MTB is specifically designed for the increased weight and forces of an E-mountain bike. With maximum impact protection and durability, you’ll ride more laps, with less fatigue, and less worry. As our customers say, “It’s a no-brainer for E-MTBs.”

Argotal is the ideal tire for loose terrain, with cornering stability and increased side-grip. The open tread pattern allows for self-cleaning so you can push your riding limits through dust and loam. - Supported in-line shoulder studs with supportive structure for high stability even when cornering aggressively to provide high mechanical grip especially in loose soils - Open tread pattern design for perfect interaction on loose surfaces with good self-cleaning in moist and wet conditions - The pronounced studs are equipped with steep ramps to generate mechanical grip through a pattern-soil interaction for expectational grip in on loose and mixed surface - Durable single ply carcass construction with reinforcement. Balance between weight and robustness - Soft-Compound offers a balance of grip and rolling resistance for gravity focused use cases. A high level of grip with a reasonable rolling resistance for optimized rolling properties Enduro or Trail riding - E25 e-bike rating features a high quality structure with puncture protection to reduce premature wear brought about by the additional driving force

Kryptotal Rear tire is optimized for the rear wheel; this all around tire balances stability of grip, traction for braking and rolling resistance. Ideal for mixed terrain conditions for you to push your limits in trail, enduro or downhill gravity riding. - Carcass construction is robust and impervious against damage and penetration from foreign objects, resulting in a versatile, low weight and an attractive design - Pair with Kryptol Front tire for optimum use - Durable single ply carcass construction with reinforcement. Balance between weight and robustness - Soft-Compound offers a balance of grip and rolling resistance for gravity focused use cases. A high level of grip with a reasonable rolling resistance for optimized rolling properties Enduro or Trail riding - E25 e-bike rating features a high quality structure with puncture protection to reduce premature wear brought about by the additional driving force

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

CushCore TRAIL provides an all-new option for riders looking for a performance/weight balance between our PRO and XC inserts. Additionally, CushCore TRAIL was engineered to provide more progressive sidewall support: the harder you push, the more support you’ll feel. Enabling supple tire response on flat corners and a stable sidewall when railing berms. Like all CushCore tire inserts, TRAIL absorbs shock and vibration, improves cornering, and prevents flats/rim damage … giving TOTAL CONFIDENCE for All Riders. Tire Widths: 2.1"-2.6" Inner Rim Width: 22mm-35mm Includes: (1) CushCore tire insert, (1) 44mm CushCore presta air valve, valve core tool, installation instructions, and rim stickers.

CushCore TRAIL provides an all-new option for riders looking for a performance/weight balance between our PRO and XC inserts. Additionally, CushCore TRAIL was engineered to provide more progressive sidewall support: the harder you push, the more support you’ll feel. Enabling supple tire response on flat corners and a stable sidewall when railing berms. Like all CushCore tire inserts, TRAIL absorbs shock and vibration, improves cornering, and prevents flats/rim damage … giving TOTAL CONFIDENCE for All Riders. Tire Widths: 2.1"-2.6" Inner Rim Width: 22mm-35mm Includes: (1) CushCore tire insert, (1) 44mm CushCore presta air valve, valve core tool, installation instructions, and rim stickers.

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 33mm to 46mm and inner rim widths 19mm to 26mm Includes - 1 CushCore Insert - 1 CushCore Tubeless Air Valve - Installation Instructions