Pedals

Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs

- 100% SDG DNA in the design of these pedals - Utilizes a flat profile which allows optimal grip for flat pedal shoes - Composite body design - Minimal 17mm pedal body height maximizes the pedal feel - 105mm x 110mm Platform - Ramped and undercut traction pad - 18 pins, replaceable, bottom loaded - Bearing/bushing design for maximum durability. Fully rebuildable pedal design - Cro-Mo axle

The Stamp 1 Gen 2 pedals build upon the Stamp legacy with a true concave body design for enhanced on-trail confidence, trusted Igus internal components for durability, and a new one-piece pin design for maximum grip and easy pin replacement. Crafted with an uncompromising commitment to quality, the updated Stamp 1 boasts a robust nylon composite body and inherits the tried-and-true internals from the award-winning Stamp 7 flat pedals, keeping you supported lap after lap. - Thin, concave profile - 13.5mm to 15.5mm pedal body height - One-piece replaceable traction pins, 10 per pedal - Upgraded, fully serviceable IGUS bearings and seal system - Forged SCM 435 Chromoly Steel spindle - Optimal size-specific surface area - Platform dimensions: 114 x 114mm - Large recommended for shoe sizes: 10-15 (US M) // 43.5-49 (EU)

The Crank Brothers Mallet E 11 is the premium version of the ideal enduro racing pedal. The specs say it all. - Titanium wings to reduce weight - Dual chamfered edges to reduce rock-strikes - Exclusive double-anodized black and gold colorway - Concave platform for secure foothold - 6 adjustable pins per side for grip - Traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - 52mm q-factor for maneuverability on tight trails - Hex alloy endcap for durability - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system

- Hollow steel axle that makes it light and durable, as well as TIME's exclusive ATAC system that offers very easy engagement. - The open design automatically clears debris each time you step in for reliable performance every time. Specs: - Pedal Material: Composite - Pedal Weight: 147g - Cleat Compatibility: ATAC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction pins: 9 per side (mounted from back) - Inner Bearing type: Igus LL-glide bearing - Outer Bearing type: Enduro cartridge bearing - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

Shimano's M540s are race-ready clipless pedals that don't require a team budget. These rugged, light beauties feature dual-sided Shimano SPD bindings that are easy to enter and exit and deliver excellent power transfer and maneuverability. The bindings are adjustable for dialing in the perfect tension and these sweet pedals have an open mud-shedding design to prevent clogging. Plus, the M540s are built to last with chromoly axles and sealed-cartridge bearings. - 352 grams (pair)

- Oversized, hollow, steel axle, is lightweight yet rugged enough for any trail condition. - TIME's clamping system makes clipping in super easy. - Two release angle options (13° or 17°) along with a self-cleaning design that means you'll always be able to clip in – even in the muddiest of conditions. - Pedal Material: Composite - Pedal Weight: 190g - Cleat Compatibility: ATAC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16''

Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.

Crank Brothers' most versatile pedal. The Candy excels at it all—cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. Specs: - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 355g per pair - Warranty: 5 years

The SPEEDPLAY Walkable Cleat Cover Kit replaces your worn bicycle cleats to provide protection, comfort and traction. The kit is compatible with your Wahoo SPEEDPLAY Standard or Easy Tension Bike Cleats, as well as legacy SPEEDPLAY ZERO Walkable Cleats. The kit does include Cleat Surrounds.

- Developed for the TIME XPRO & XPRESSO road bike pedal range. - They allow angular and lateral freedom in order to respect the natural movements of your legs and joints. - You can also adjust the Q-factor (by switching the cleats) - The Bi-material brings more durability when walking with the cleats. - These cleats are the stock cleats included with all XPRO & XPRESSO pedals.

You've got flat shoes and shoes with cleats. Are you really gonna let your pedals tell you which ones you can wear? Crank Brothers' hybrid-style Double Shot is a flat and clipless pedal to suit your every pedaling whim. Molded pins and ribs offer superior grip, and diamond plate pads are supremely tactile. You've got entry from either side of the pedal, so that's two chances per revolution to catch. Thanks to the wide, platform-style body, though, you'll keep moving even if you don't. Specifications: - spindle material: forged scm 435 chromoly steel - body material: A380 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - cleat: premium brass cleats with shims included - weight: 395g per pair

The Mallet 2 pedal from Crank Brothers is ready to drop the hammer. No, seriously, this thing has been redesigned and rebuilt from the ground up, and it's a whole new creature. Durability and a lightweight aluminum body take the center stage in this versatile pedal that's equally at home shredding singletrack and providing a platform for your sneakers while you ride to class. The Mallet 2 offers a flat pedal feel and clipped-in control simultaneously for the best of both worlds and performance you can feel. And, with a customizable float and release angle, your body will thank you with miles and miles of fun.

Size specific magnesium platform pedal provides optimal shoe/pedal interface. Details - Magnesium pedal body for weight reduction - Optimal surface area - Minimal body profile - 16mm thin - Concave pin profile & 10 adjustable pins per side for grip - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Serviceable, pedal refresh kit found here Specs - Adjustable pins: 10 per side - Body material: AM60B Magnesium Alloy - Endcap: T15 - Footprint: 114mm x 111mm - Inner bearing type: Igus Bearing - Max rider weight: No restriction - Outer bearing type: Double Cartridge Bearing - Shoe size: US 10-15 // EU 43-49 - Spindle material: Forged SCM 415 Chromoly Steel - Warranty: 5 years - Weight: 386g per pair

- Works with all RXS and Impact pedals. - Five degrees of heel float and 2.5mm of lateral float along the pedal axle. - Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.

- Large platform size with concave profile combines support with ultimate grip - Strong and lightweight one piece alloy body in eight color options - Forged chromoly axle delivers strength and durability - Shot-peen surface increases fatigue life and impact resistance - Material: Alloy - Platform Size (mm): 100 x 105 - Platform Profile: (mm) 16mm - Weight (g): ±395/set - Axle: Cold-forged Chromoly steel - Bearing/Bushing: Industrial bearing, IGUS bushing - Pins: 12 steel & 8 alloy pins per pedal - Virtual Concavity - Finish: Mottled / grunge anodized

- Dial your fit with Spoon flat pedals available to fit from kid's sizes - 90mm = US shoe sizes 6 & under / 100mm = US shoe sizes 7~10 / 110mm = US shoe sizes 11+ - Forged chromoly axle which delivers strength and durability - 16mm-12mm concave profile with 20 preassembled steel pins for added grip - Shot-peened and anodized to enhance fatigue life - Recommended for: ASTM 5, All mountain, Trail, Enduro, free ride, DH, E-Bike, KIDS (90x105) - PLATFORM SIZE (mm): 90x105 - PLATFORM PROFILE (mm): 16—12 concave profile - WEIGHT +/- (g): 360 / 400 / 420 per set - AXLE: cold forged chromoly steel - BEARING/BUSHING: industrial sealed bearing, IGUS bushing - PINS: 20 steel pins (per pedal) - TECHNOLOGIES: Chamfered leading edges - MATERIAL: MGR extruded alloy body, CNC optimized

- Full Anodized finish - 16-12mm concave platform - 100mm x 105mm platform - CNC Alloy Pedal Body - Hollow Taper Scandium Enriched Steel Axle - Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces - Oversized Sealed Full Compliment Inboard Industrial Bearing - Sealed Outboard IGUS Bushing - CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence - Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin

Crank Brothers' 5050 Pin Kit includes 40 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.

- Pedal Body Cover Cap Left/Right TIME Xpresso Black including screws

- Pedal Grip pins/bolts and 4 tension screws TIME SPECIALE 8/12

Shorter 7mm rear load pins for the outer extremities of SPOON, SPIKE, and OOZY pedals. - Provide durability and improved safety - Mix and match with the longer stock pins to customize your ideal amount of grip

Crank Brothers' Zero Float Cleats offer no pedal float for greater pedaling efficiency. They're made from solid brass for crisp entry and exit, and top-notch durability. - Weight (pair): 30 grams - Shoe compatibility: SPD - Release angle: 15 degrees

Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design sheds mud and debris quickly, and these pedals sport 6-degrees of knee-friendly float. The Eggbeater 2s feature forged chromoly axles, stainless-steel springs, and cast steel bodies. Plus, the internals are water-tight for excellent durability and consistently smooth pedaling.

Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. - Spindle material: Forged scm 435 chromoly steel - Body material: One piece composite - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 294g per pair - Warranty: 5 years

Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: -Enduro catridge bearings - Igus LL-glide bearings - Double seal system (internal and external seals) - Hex alloy end caps - O-rings - Nuts - Sleeve bushings - Bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s

Lightweight one-piece Polypropylene thermoplastic pedals with in-molded grip nodes. - Proportionally smaller platform size is perfect for smaller-sized feet - Durable 7mm boron steel axle - Loose ball bearing axle assembly - Built-in reflectors included - 9/16" / 1/2" axle options - 300g per pair - Dimensions: 93 x 87mm

A nylon evolution of DMR's V12 body design. Equipped with the same concave footprint and narrow profile DMR pedals are known for, while spinning on a Dual DU bushing system to provide the value of a plastic pedal with a thoughtful approach to increased durability. - Chromoly axle - Dual DU bushing system - Full-length 6mm off-road pins for added grip

Largest platform pedal from Blackspire with a solid 105mm x 105mm surface area 17mm low profile body with concave shape to maximize grip CNC'd and extruded 6061 T-6 aluminum Sealed bearing and proprietary KY bushing internals Nickle plated forged chromoly spindles 10 replaceable steel traction pins per side Polished and anodized finish with laser etched graphics Machined and assembled in Canada Weight: 500g