On Rider

Proven MIPS Coverage for Superior Open-Face Performance The Speedframe MIPS Helmet has premium features usually meant for much more expensive helmets. A MIPS liner, goggle compatible 3-position visor, and our 360-degree fit make the Speedframe one of the best values in an open-face helmet. Add in the legendary aggressive Fox design DNA, and you have one of the most shred-ready trail helmets in the market today. Features - Proven MIPS impact protection system reduces rotational forces in a crash - Removable, washable moisture-wicking comfort liner - Optimized venting with channeled, in-molded EPS provides efficient cooling - Goggle compatible, 3-position adjustable visor - 360 Fit System allows you to dial in your perfect fit every ride - Weight: 360g Sizing - Small = 51 – 55cm - Medium = 55 – 59cm - Large = 59 – 63cm Certifications - CPSC - EN 1078 - AS/NZS 2063

We imagined the Sanction 2 to be the go-to full-face helmet for shredders from 5 to 75. This helmet was born rowdy and will never look back. Rowdy by Nature Featuring understated colorways, sleek ID, and a bevy of technical features, Sanction 2 looks, performs, and fits like a much more expensive helmet. During the ground-up design process, our engineering team focused on three core tenets: Fit. Breathability. Value. Fit is amply handled by our new Ventilated DH Air padding. The cheek pads are removable for ease of washing. To address breathability, we spec'd the helmet with 14 vents to prioritize ventilation, regardless of where the helmet is being ridden. We took decades of bike helmet design and race expertise and packed it all into the most affordable full face we've ever made. The result is a bold-looking new helmet perfect for the newer park rider, BMX racer on a budget, or young riders learning to go big. Finally, select colors of the Sanction 2 are available in size XXS to fit the smallest shredders out there and features both ASTM Downhill and BMX certifications. - FLYING BRIDGE VISOR TECHNOLOGY This visor design allows more flexibility and improves airflow across the helmet. By not using a traditional center post and screw concept, we're able to increase the amount of energy management material in a high-impact zone

Topeak's Modula Java Cage carries your 12 or 16 ounce coffee cup with ease, so you can bring your favorite hot beverage along for the ride. It grabs securely with a rubber strap and adjusts to fit most insulated mugs.

Easily replace the original visor on your iXS Trail RS helmet with this visor. Just bolt it on.

- Enhanced bottle retention - PTFE buttons protect bottles from black marks and scratching - Easier bottle insertion - 56g

Fiber-Reinforced Composite (FRC) Matrix material is specifically engineered to reduce weight without compromising strength or durability - The weight and performance of a carbon cage at a fraction of the price! - Upper catch and cage design hold bottle securely, while the large upper opening allows for easy removal and insertion from either the top or sides - x2 M5 x 0.8 T bolts included - Weight: 37g

Complete headring replacement for iXS helmets

Keep it rolling with clear vision The Fox Vue goggle Total Vision System combines a tear-off and roll-off system in one. The system features built-in posts so you can equip tear-off sheets onto the roll-off system. The clear Lexan™ lens offers 100% UV protection and is anti-fog and anti-scratch treated. - Compatible with Fox Vue goggles - 45mm wide film gives superior view even during the worst conditions - Canisters are translucent grey to allow the light in through to the goggle - Tight seal keeps the mud out and the parts working properly - Monofilament bands keep the film from sticking to the lens - Film is coated with anti-stick treatment on bottom side - Lens is anti-fog treated to maintain a clear view - Some assembly required - Contents: 1 clear lens, 2 translucent canisters, 2 rolls of 45mm film, 2 mudguards, and 1 extra pin

Replacement lens for Airspace & Main VLS Roll Off System.

Replacement lenses for Fox Vue goggles. Standard lenses. - Injected-molded polycarbonate hard lens - Offers 100% UVA and UVB protection - Pre-curved design offers superior optical clarity - Meets ANSI Z87.1-2010 and EN1938:2010 standards for impact resistance - Anti-fog treated

Mx20 Airspace/Main 45mm Total Vision System (Lexan)

Replacement lens for Vue Roll Off System - Injected-molded polycarbonate hard lens - Offers 100% UVA and UVB protection - Pre-curved design offers superior optical clarity - Meets ANSI Z87.1-2010 and EN1938:2010 standards for impact resistance - Anti-fog treated

Compatible with Variable Lens System (VLS) goggles only. This lens system allows for the transfer of standard and injection molded lenses in the same frame. Airspace and Main goggles share the same standard and injection molded lens as well as tear-offs. Our Spark lens is mirrored for improved visibility and reduce glare in bright daylight. - Variable Lens System™ (VLS) replacement lens - Injected-molded polycarbonate hard lens - Pre-curved design offers superior optical clarity - Offers 100% UVA and UVB protection - Mirrored lens

Replacement lens for Vue Roll Off System - Injected-molded polycarbonate hard lens - Offers 100% UVA and UVB protection - Pre-curved design offers superior optical clarity - Meets ANSI Z87.1-2010 and EN1938:2010 standards for impact resistance - Anti-fog treated

Mirrored replacement lenses for Vue goggles. Spark lenses. Our Spark lens is mirrored for improved visibility and reduce glare in bright daylight. - Injected-molded polycarbonate hard lens - Offers 100% UVA and UVB protection - Pre-curved design offers superior optical clarity - Meets ANSI Z87.1-2010 and EN1938:2010 standards for impact resistance - Anti-fog treated

When you're motocross riding, you can't afford to compromise vision. Maintain a clear line of sight in muddy and wet riding conditions with the Fox Vue goggle Total Vision System. This 6 pack of replacement film rolls will keep you, and your roll off system stocked up, so you're ready when the weather takes a turn for the worst. - For use with the Fox Vue goggle Total Vision System - 45 mm wide film gives superior view even during the worst conditions - Film is coated with anti-stick treatment on bottom side - 6 film rolls

Don't just throw them in your race duffle - protect your precious goggles from the hard-scratch life with the Google Bag - Standard.

Compatible with Variable Lens System (VLS) goggles only. This lens system allows for the transfer of standard and injection molded lenses in the same frame. Airspace and Main goggles share the same standard and injection molded lens as well as tear-offs. - Variable Lens System™ (VLS) replacement lens - Injected-molded polycarbonate hard lens - Pre-curved design offers superior optical clarity - Offers 100% UVA and UVB protection

Tear-offs help you maintain a clean field of vision in muddy conditions. Compatible with Variable Lens System (VLS) goggles only. This lens system allows for the transfer of standard and injection molded lenses in the same frame. Airspace and Main goggles share the same standard and injection molded lens as well as tear-offs. - Tear offs should be mounted so that the pull tabs are on the riders left side - For use with VLS Airspace and Main goggles only - 20 pack included

Compatible with Variable Lens System (VLS) goggles only. This lens system allows for the transfer of standard and injection molded lenses in the same frame. Airspace and Main goggles share the same standard and injection molded lens as well as tear-offs. Our Spark lens is mirrored for improved visibility and reduced glare in bright daylight. - Variable Lens System™ (VLS) replacement lens - Mirrored Lexan™ lens - Lexan™ lens offers excellent UV protection - Offers 100% UVA and UVB protection

Affordable MIPS™ trail helmet for young riders Don't take chances with their most precious asset - their brain. The Youth Mainframe Helmet delivers the goods to young riders, offering them the same proven safety features older riders get in their Mainframe helmet, and all with the same easy trail style. Featuring extended coverage to protect more of their noggin', the proven MIPS™ impact protection will keep their brain safe in the event of a crash by absorbing and redirecting energies and forces that could otherwise damage it. Featuring a lightweight fit system, the Youth Mainframe Helmet will also keep young heads cool and well vented. Should the sweat stank build up, you can easily whip out the moisture-wicking liner and run it through the wash to get them riding fresh again in no time. Great protection at a price that won't break the bank. - Proven MIPS™ impact protection system reduces rotational forces in a crash - Extended coverage for added safety - Optimized venting with channeled, in-molded EPS provides efficient cooling - Removable, washable moisture wicking liner - MIPS™ integrated fit system reduces weight and provides a more comfortable, seamless fit - EPS, PC, PA, polyester

- MIPS' added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area - 8 Big Bore vents and 7 exhaust vents keep you cool and aid in moisture management - The securely fixed visor is positioned to channel airflow into the Big Bore vents - Fidlock SNAP helmet buckle provides quick and secure entry and exit while wearing gloves - Removable antimicrobial and moisture wicking liner - Includes additional pads for custom dialed fit - EPS, PC, PA, Epp, Polyester

Pro-inspired full-face mountain bike helmet featuring MIPS. - MIPS' added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Lightweight fiberglass shell construction designed for strength and performance - Goggle compatible adjustable visor - Removable, washable moisture wicking liner - Lightweight and reliable Double D-Ring closure - Fiberglass, EPS, EVA, PC, PCV, Polyester

- MIPS' added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area - 8 Big Bore vents and 7 exhaust vents keep you cool and aid in moisture management - The securely fixed visor is positioned to channel airflow into the Big Bore vents - Fidlock SNAP helmet buckle provides quick and secure entry and exit while wearing gloves - Removable antimicrobial and moisture wicking liner - Includes additional pads for custom dialed fit

Aggressive styling in our most affordable DH certified helmet. - Lightweight injection molded ABS shell - Inspired by our podium proven Rampage Pro Carbon - Injected Mesh vent screens maintain superior ventilation and airflow while providing protection from dirt and debris - Double D-Ring closure - Adjustable Visor - PC, ABS, PA, EPS, Polyester

Flight Pro Helmet from Fox Racing.

Aggressive styling in our most affordable DH certified helmet. - Lightweight injection molded ABS shell - Inspired by our podium proven Rampage Pro Carbon - Injected Mesh vent screens maintain superior ventilation and airflow while providing protection from dirt and debris - Double D-Ring closure - Adjustable Visor - 49% ABS, 16 MIPS

Rampage Helmet Ceshyn helmet from Fox Racing.

Flight Pro Helmet Prpus from Fox Racing.

Rampage Comp Stohn from Fox Racing.

The Speedframe Pro Blocked Helmet has earned Virginia Tech’s best rating (5 STARS) in its Bicycle Helmet Ratings program. Designed with input from our pro mountain bike athletes, this top-tier open-face mountain bike helmet offers a market-leading feature set. Top of that list is MIPS, which is designed to reduce rotational motion and redirect forces away from your brain should you crash. Dual-density Varizorb EPS bumps up that impact protection even further by spreading forces of impact across a wider area. The 360-degree fit system and Fidlock SNAP helmet buckle ensure a perfect fit every time you ride, and the buckle is a cinch to operate, even with gloves on. The XT2 liner is antimicrobial and manages odor while wicking moisture away from the head, and once it gets a little stinky, is easily removed and washed. Goggles pair well with the Speedframe Pro Blocked Helmet too, thanks to the 3-position adjustable visor. If you’re looking for a performance-minded trail helmet, congratulations—you just found your new lid. - MIPS added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area - Fidlock SNAP helmet buckle provides quick and secure entry and exit while wearing gloves - Removable, washable XT2 liner is antimicrobial and manages odor while wicking moisture away from the head - Optimized venting with channeled, in-molded EPS provides efficient cooling - Goggle compatible, 3-position adjustable visor - 360° Fit System allows you to dial in your perfect fit every ride - Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel

The Flight Helmet takes the traditional dirt-jump lid to all-new levels of protection, performance, and comfort. The M9 Multi-Sector liner uses 9 distinct segments for improved fit, comfort, and superior breathability. Additionally, it is made using our proprietary Varizorb Multi Density EPS foam which absorbs, disperses and reduces the force of impact to the head in crashes. - Dirt-jump and trail-specific functionality - M9 segmented EPS design for improved fit, flexibility, and comfort - Varizorb multi-density EPS liner provides improved protection - Thin ABS shell for reduced weight - 8 large Big Bore vents for increased airflow and lighter weight - Heat-sealed comfort liner for a clean look and feel

Our Full-Coverage Open-Face MTB Helmet Redefining open-face helmets, the Dropframe Pro has earned Virginia Tech's best rating (5 STARS) in their Bicycle Helmet Ratings program with the best rating of any helmet they have ever tested. Super-light and extremely comfortable, it's the choice for trail riders seeking more coverage, more confidence, and more fun. This game-changing open-faced enduro helmet features MIPS, our dual-density Varizorb EPS liner, and increased coverage for the ears, jaw, and back of the head. This MTB helmet provides the most complete coverage we offer in an open-face helmet. Features - Proven MIPS impact protection system reduces rotational forces in a crash - Dual-density Varizorb EPS liner is meant to provide improved impact protection - 8 Big Bore vents and 7 exhaust vents keep you cool and aid in moisture management - Fixed visor is positioned perfectly for maximum air flow - Fidlock SNAP helmet buckle provides quick entry and exit - Removable antimicrobial and moisture-wicking liner - Includes additional pads for a custom fit - Small = 52 – 54cm - Medium = 54 – 56cm - Large = 56 – 58cm - X-Large = 58 – 60cm Certifications - CPSC - EN 1078 - AS/NZS 2063

The Rampage Comp Matte Black Helmet offers a class-leading feature set including MIPS, a lightweight fiberglass shell, fully-adjustable visor, and many other options usually reserved for much more expensive mountain bike helmets. The design is inspired by our championship-winning Rampage Pro Carbon and maintains that aggressive design which looks as fast sitting still as it does on the bike. Features - Proven MIPS impact protection system reduces rotational forces in a crash - Lightweight fiberglass shell designed for strength and performance - Goggle compatible adjustable visor - Removable, washable moisture-wicking liner - Lightweight and reliable double d-ring closure

Mud guards prevent water, dirt, mud, and other debris from entering the Fox Vue goggle Total Vision System. Keep your roll-off system in prime condition with this 3 pack of replacement mudguards. - For use with the Fox Vue goggle Total Vision System roll-off system - 3 pack

Full coverage open-face mountain bike helmet. Bump up your protection level for enduro and trail riding with the top-rated Dropframe Helmet, delivering added coverage for your head, ears, and jaw. This 3/4 enduro helmet features Mips® protection, our dual-density Varizorb™ EPS liner, and more coverage than a traditional open-face helmet. Key Features and Specifications: - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area - 8 Big Bore vents and 7 exhaust vents keep you cool and aid in moisture management - The securely fixed visor is positioned to channel airflow into the Big Bore vents - Removable anti-microbial and moisture-wicking liner - Includes additional pads for a custom dialed fit Materials: 31% EPS, 16% TPE, 14% polycarbonate, 10% PA, 6% polyurethane foam/polyester *Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel

Maximum coverage open-face mountain bike helmet. The Dropframe Pro Helmet is a game-changing, open-faced 3/4 enduro helmet. It features Mips®, the BOA® fit system for class-leading fit and security, increased ventilation, plus an ionic+® anti-microbial liner and cheek pads to optimize fit. With its increased coverage for the ears, jaw, and back of the head, this MTB helmet provides the most complete coverage we offer in an open-face helmet. Key Features and Specifications: - BOA® fit system for class-leading fit and security - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - 3-position adjustable visor compatible with goggles - Removable under visor GoPro mount included - Big Bore front vents include eyewear storage recess - Increased ventilation and decreased surface contact area improve cooling - Ionic+® anti-microbial liner and cheek pads to optimize fit - Fidlock magnetic closure Meets the NTA-8776 E-bike helmet certification standard Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel Materials: 30% EPS, 11% EVA, 10% polycarbonate, 13% nylon, 11% Pom, 14% Tpee

Proven Mips™ coverage for superior open-face performance. The Speedframe Helmet has premium features usually meant for much more expensive helmets. The Mips® impact protection is designed to reduce rotational motion and redirect forces from your brain should you crash, while the removable and washable moisture-wicking comfort liner means you can always keep this helmet fresh and free of sweaty ride stink. Key Features and Specifications: - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Optimized venting with channeled, in-molded EPS provides efficient cooling - Goggle-compatible, 3-position adjustable visor - Removable, washable moisture-wicking liner - 360° Fit System allows you to dial in your perfect fit, in every ride Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel Materials: 38% EPS, 22% nylon, 34% PC, 4% polyester, 3% POM

Versatile, lightweight trail helmet. The all-new Crossframe Pro Helmet is bred for elevated heart rates, ?at-out sprints, and everything in between. Lightweight, versatile, and crafted with Mips® and BOA®, this helmet is ready for any trail you are on. Key Features and Specifications: - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area - Fidlock SNAP helmet buckle provides quick and secure entry and exit, even while wearing gloves - Strap divider adjustment for repositioning the angle of the chinstrap - Removable, washable Ionic+® liner is anti-microbial and manages odor while wicking moisture away from the head - Optimized venting with channeled, in-molded EPS provides efficient cooling - BOA® retention system with micro-adjustability allows you to fine-tune your fit on the fly - Rear cradle adjustment for setting the BOA dial to an ideal position - TPU vent inserts to keep your sunglasses securely stored when not in use Size: Sizes: small, medium, and large (see size guide for measurements) How to Dial Your Fit: - BOA® dial: micro adjustments - counterclockwise to loosen, clockwise to tighten - allow for a precisely dialed fit. Adjust while wearing the helmet. - Back cradle: four adjustment points move the cradle up or down your head to ensure the best fit possible. - Liner: two liners are included with the helmet - a preinstalled standard pad set and one additional standard pad set. For a more snug fit, an optional thick liner set is sold separately. Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel Materials: 55% EPS, 17% PC, 11% nylon, 8% fabric, 6% TPU, 2% metal, 1% pom

Roll-off, see more Never lose sight of the track with the Vue Roll-Off Goggles, allowing you to keep your vision clear with the 45 mm roll-off canister attached to the lens. Like all Vue Goggles, the Vue Roll-Off Goggles ensure the widest field of view possible and reduce distractions from the side. They feature a pre-curved, injection-molded polycarbonate lens for distortion-free optical clarity and increased impact resistance. Specifications: - Wide viewport provides exceptional peripheral vision - 45 mm roll-off canister attached to the lens - Injected polycarbonate lens is designed to provide optical clarity and protect against roost impact - TruLock system makes lens replacement quick and easy - Soft TPU faceplate forms to rider's face for improved comfort - ABS/nylon outer frame to resist roost and increase durability - 360 venting optimizes airflow keeping the rider cool and reduces fogging - 45 mm strap with backing silicone stripe provides superior helmet grip - 3-layer molded foam wicks sweat and provides a comfortable fit - Offers UVA and UVB protection - Pre-curved design offers superior optical clarity - Meets ANSI Z87.1-2010 and EN1938 standards for impact resistance - 28% Tr90, 23% polyester, 21% Tpu, 18% polycarbonate, 6% polyurethane, 4% nylon

Skate, BMX, Dirt Jump, and E-Bike Helmets. The Flight Helmet is ready to protect you should things go sideways. It features Mips® technology and an interior shape of the sits lower on your head to improve overall fit. If you're on a skateboard or scooter at the skate park or on the street, if you’re hitting big dirt jump tricks or laying down speedy BMX race laps, if you’re on a pump track, or experiencing the extra lift and power of an e-bike as you commute, the Flight Helmet is for you. Key Features: - Mips® equipped - Designed to sit lower on the head for a lower-profile look and fit - Includes two comfort liner Specifications - Mips® impact protection system is designed to reduce rotational forces in a crash - Designed to sit lower on the head for a lower-profile look and fit - Single-density EPS construction - Includes two comfort liner sets - Standard buckle closure system

Key Features - Wide viewport provides exceptional peripheral vision - Hard lens provides optical clarity and protects against roost impact - Easy lens swap system - 360 venting optimizes airflow for cooling and reduced fogging - 45 mm strap with backing silicone stripe provides superior helmet grip See more with pro-level Vue dirt bike goggles The Vue Core Goggles ensure the widest field of view possible and reduce distractions from the side. They feature a pre-curved, injection-molded polycarbonate lens for distortion-free optical clarity and increased impact resistance. For lens swapping and removal, the Vue Goggles use our TruLock system. The system's turn-to-release tabs allow you to change lenses in seconds. Rounding out these pro-level goggles are a 45mm strap, a high-flow 360 venting system that keeps you cool and reduces fogging, and a comfortable 3-layer foam to keep sweat out of your eyes. Specifications: - Wide viewport provides exceptional peripheral vision - Injected polycarbonate lens is designed to provide optical clarity and protect against roost impact - TruLock system makes lens replacement quick and easy - Soft TPU faceplate forms to rider's face for improved comfort - ABS/nylon outer frame to resist roost and increase durability - 360 venting optimizes airflow keeping the rider cool and reduces fogging - 45 mm strap with backing silicone stripe provides superior helmet grip - 3-layer molded foam wicks sweat and provides a comfortable fit - Offers UVA and UVB protection - Pre-curved design offers superior optical clarity - Meets ANSI Z87.1-2010 and EN1938 standards for impact resistance

The Crossframe Pro Exploration Helmet is bred for elevated heart rates, ?at-out sprints, and everything in between. Lightweight, versatile, and crafted with Mips® and BOA®, this helmet is ready for any trail that you are.

Take Some Stress Off Track Days Protecting and organizing your essential race eyewear has never been easy. But that has all changed thanks to the Fox Goggle Case. This durable case easily holds up to 3 sets of bike goggles plus extra lenses, tear-offs, and cleaning cloths, so you are ready for changing light and weather conditions. This case is the perfect accessory for your dirt bike or mountain bike goggles. Features - Adjustable dividers accommodate at least 4 goggles - Attached haul handle for easy transport - Tricot inner liner keeps goggles safe and scratch-free - Durable 600D main body Dimensions - 22 x 13 x 33cm - Volume: 11L

The MTB helmet trusted by World Cup champions. Designed for the toughest downhill mountain bike runs, the Rampage Pro Carbon Mips® Helmet is full-face, full-gas, and packed with race-ready features and technology that’ll keep your head in the game and your safety on speed dial. When every second counts, you can’t argue with gravity. Lightweight performance and protection for all your downhill runs—you can’t argue with that either. Key Features and Specifications: - Full-face mountain bike helmet - Mips® added protection system is meant to reduce the rotational motion by absorbing and redirecting energies and forces otherwise transmitted to the brain - Breakaway visor screws are designed to sheer off at impact to reduce rotational forces - Dual-density, In-Mold Varizorb™ EPS balances weight with performance and is meant to provide improved protection by spreading forces over a wider surface area - Lightweight carbon fiber shell construction - Injected Mesh vent screens maintain superior ventilation and airflow while shielding the rider from dirt and debris - Removable, washable X-Static® comfort liner and cheek pads are antimicrobial and manage odor while wicking moisture - Structured carry bag with vents and fleece lining Meets EN 1078, CPSC 1203, AS/NZS 2063, and ASTM F1952 Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel Materials: 40% composite, 19% EPS, 16% polyurethane foam/polyester, 8% nylon, 7% Abs+pc

Versatile, lightweight trail helmet The Crossframe Pro Pulse Helmet is born to tackle elevated heart rates, ?at-out sprints, and everything in between. Lightweight, versatile, and crafted with Mips® for added protection and BOA® to help dial in that fit every time, this helmet is ready for any trail that you're up for. - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb™ EPS provides improved protection by spreading forces of impact across a wider area - FIDLOCK SNAP helmet buckle provides quick and secure entry and exit, even while wearing gloves - Removable, washable Ionic+® liner is antimicrobial and manages odor while wicking moisture away from the head - Optimized venting with channeled, in-molded EPS provides efficient cooling - BOA® retention system with micro-adjustability allows you to fine-tune your fit on the fly - TPU vent inserts to keep your sunglasses securely stored when not in use

Maximum coverage open-face mountain bike helmet The Dropframe Pro Digi Image Helmet is a game-changing, open-face 3/4 enduro helmet. It features Mips®, the BOA® Fit System for class-leading fit and security, increased ventilation, plus an Ionic+® antimicrobial liner and cheek pads to optimize fit. With its increased coverage for the ears, jaw, and back of the head, this MTB helmet provides the most complete coverage we offer in an open-face helmet. - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb™ EPS provides improved protection by spreading forces of impact across a wider area - 8 Big Bore vents and 7 exhaust vents keep you cool and aid in moisture management - The securely fixed visor is positioned to channel airflow into the Big Bore vents - Removable antimicrobial and moisture-wicking liner - Includes additional pads for a custom dialed fit

- BOA® fit system for class-leading fit and security - MIPS’ added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - 3-position adjustable visor compatible with goggles - Removable under visor GoPro mount included - Big Bore front vents include eyewear storage recess - Increased ventilation and decreased surface contact area improve cooling - Ionic+® anti-microbial liner and cheek pads to optimize fit - Fidlock® magnetic closure - Meets the NTA-8776 E-bike helmet certification standard

Aggressive styling in our most affordable, downhill-certified helmet Our Rampage Digi Image Helmet features a lightweight, injection-molded ABS shell inspired by our iconic Rampage Pro Carbon Helmet. The 360° ventilation provides superior airflow for all-day comfort, while Mips® technology reduces rotational forces transmitted to the brain during impact. The fully adjustable visor is goggle-compatible for those dusty days when your eyes need coverage and protection. - Lightweight injection-molded ABS shell - Mips® protection system - 360° ventilation to help keep you cool while riding - Double D-ring closure - Adjustable goggle-compatible visor

Aggressive styling in our most affordable, downhill-certified helmet Our Rampage Kairos Helmet features a lightweight, injection-molded ABS shell inspired by our iconic Rampage Pro Carbon Helmet. The 360° ventilation provides superior airflow for all-day comfort, while Mips® technology is designed to reduce rotational forces transmitted to the brain during impact. The fully-adjustable visor is goggle-compatible for those dusty days when your eyes need coverage and protection. - Lightweight injection molded ABS shell - Mips® protection system is designed to reduce rotational forces in a crash - 360° ventilation to help keep you cool while riding - Double D-ring closure - Adjustable goggle-compatible visor

The mtb helmet trusted by world cup champions Designed for the toughest downhill mountain bike runs, the Rampage Pro Carbon Intrude Helmet is full-face, full-gas, and packed with race-ready features and technology that’ll keep your head in the game and your safety on speed dial. When every second counts, you can’t argue with gravity. Lightweight performance and protection for all your downhill runs—you can’t argue with that either. - Full-face mountain bike helmet - Mips® added protection system is meant to reduce the rotational motion by absorbing and redirecting energies and forces otherwise transmitted to the brain - Breakaway visor screws are designed to shear off at impact to reduce rotational forces - Dual-density, In-Mold Varizorb™ EPS balances weight with performance and is meant to provide improved protection by spreading forces over a wider surface area - Lightweight carbon fiber shell construction - Injected Mesh vent screens maintain superior ventilation and airflow while shielding the rider from dirt and debris - Removable, washable X-Static® comfort liner and cheek pads are antimicrobial and manage odor while wicking moisture - Meets EN 1078, CPSC 1203, AS/NZS 2063, and ASTM F1952

Aggressive styling in our most affordable, downhill-certified helmet Our Youth Rampage Kairos Helmet features a lightweight, injection-molded ABS shell inspired by our iconic Rampage Pro Carbon Helmet. The 360° ventilation provides superior airflow for all-day comfort, while Mips® technology is designed to reduce rotational forces transmitted to the brain during impact. The fully-adjustable visor is goggle-compatible for those dusty days when your eyes need coverage and protection. - Lightweight injection-molded ABS shell - Mips® protection system is designed to reduce rotational forces in a crash - 360° ventilation to help keep you cool while riding - Double D-ring closure - Adjustable goggle-compatible visor - Recommended for ages 4-14

The do-it-all, carry-it-all riding vest The Legion Tac Vest evenly distributes weight on your body and carries your hydration, tools, and essentials for a long day on the trail. Wear everything you need on your body. The built-in hydration—a 2L HydraPak—quenches your thirst in an instant, and features a hose that won’t flap around thanks to the magnetic stay. Organize all the tools and gear you need in multiple, strategically placed pockets that will help distribute weight more evenly over your body and keep the most used items conveniently accessible. Designed using tough and durable 600D and ripstop fabrics, the vest features a mesh back panel to provide excellent breathability on the trail. Specifications: - Utility vest with built in hydration - Durable 600D and ripstop main body fabric - HydraPak 2L reservoir - Hydration hose path with magnetic stay - Air mesh back panel for breathability - Tool organizer pockets - Back panel zippered storage pocket - Goggle and lens pockets - Chest storage pocket with clip to attach keys - Molle webbing across front and back for integrated pocketed opportunity - Dual side expansion buckles

Think you can't get a lightweight, breathable full-face helmet Think again. The Proframe RS Helmet is the new pack leader, lapping the competition in fit, function, and style. It offers class-leading fit and security care of the BOA fit system, while the increased ventilation and decreased surface contact area ratchet up the cooling properties of this savvy lid. In the event of a crash, the Mips Integra Split impact protection system when combined with the EPP liner with the EPS layer is designed to reduce rotational forces, keeping you more protected against injury on the trail. Additional features that elevate this helmet above the competition include a 3-position adjustable visor that works with goggles, an included removable under-visor GoPro mount, Fidlock magnetic closure for easy on-off, plus an ionic+ antimicrobial liner and cheek pads to help optimize fit. Welcome to the next-level protection of Proframe RS.

Safety for dirt jumps, BMX, skate, and more The Flight Pro Helmet brings that high level of safety to any rider or thrill-seeker looking to level up their protection without sacrificing style. It features Mips® technology, an interior shape that sits lower on your head to improve overall fit, and a 360° Fit System to adjust comfort. The FIDLOCK buckle system clicks open easily for helmet removal, and the helmet comes with two XT2® anti-microbial comfort liners, so you're set for spares when you need 'em. E-bike riders, electric scooters, and one-wheel daredevils are covered, too. Key Features - Now featuring Mips® technology - Multi-density EPS - 360° Fit System provides a precise fit - FIDLOCK SNAP magnetic buckle closure Specifications - Mips® impact protection system is designed to reduce rotational forces in a crash - Multi-density EPS for high and low-speed impacts - 360° Fit System provides a customized, secure fit - Updated interior shape sits lower on the head for a confidence-inspiring fit - Includes two XT2® anti-microbial comfort liner sets - FIDLOCK buckle closure system

Youth Flight Helmet Togl from Fox Racing.

Lightweight full-face helmets for all-mountain riders and enduro racers. The Youth Proframe Helmet delivers exceptional airflow and breathability on both climbs and descents. Those looking to capture every sweet run will appreciate the removable, under-visor GoPro mount. Ride wide open with the Proframe Helmet. Key Features and Specifications: - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - 3-position adjustable visor compatible with goggles - Removable under visor GoPro mount included - Increased ventilation and decreased surface contact area improve cooling - Includes additional pad set to optimize fit Meets the ASTM-F1952 Downhill MTB certification standard Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel 22% ABS, 21% EPS, 15% polycarbonate, 13% polyurethane, 9% Pa

Skate, BMX, Dirt Jump, and E-Bike Helmets The Youth Flight Helmet is ready to protect you should things go sideways. It features Mips® technology and an interior shape that sits lower on your head to improve overall fit. If you're on a skateboard or scooter at the skate park or on the street, if you’re hitting big dirt jump tricks or laying down speedy BMX race laps, if you’re on a pump track, or experiencing the extra lift and power of an e-bike as you commute, the Flight Helmet is for you. Key Features: - Mips® equipped - Designed to sit lower on the head for a lower-profile look and fit - Includes two comfort liners Specifications: - Mips® impact protection system is designed to reduce rotational forces in a crash - Updated interior shape sits lower on the head for a confidence-inspiring fit - Single-density EPS construction - Includes two comfort liner sets - Standard buckle closure system

Aggressive styling in our most affordable, downhill-certified helmet Our Rampage 5050 Helmet features a lightweight, injection-molded ABS shell inspired by our iconic Rampage Pro Carbon Helmet. The 360° ventilation provides superior airflow for all-day comfort, while Mips® technology reduces rotational forces transmitted to the brain during impact. The fully adjustable visor is goggle-compatible for those dusty days when your eyes need coverage and protection. - Lightweight injection-molded ABS shell - Mips® protection system - 360° ventilation to help keep you cool while riding - Double D-ring closure - Adjustable goggle-compatible visor

Performance-focused open-face trail helmet - MIPS' added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area - Fidlock SNAP helmet buckle provides quick and secure entry and exit while wearing gloves - Removable, washable XT2 liner is antimicrobial and manages odor while wicking moisture away from the head - Optimized venting with channeled, in-molded EPS provides efficient cooling - Goggle compatible, 3 position adjustable visor - 360°Fit System allows you to dial in your perfect fit every ride - EPS, PC, PA, Polyester