Parts

- Service parts for E-13 chainguides - Fits: 06+ single ring guides

- A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9-degree backsweep and 5-degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength to weight ratio - Base Handlebar uses 6061 aluminum

e*thirteen Base Composite Platform Pedals are a composite solution for performance platform pedals. e*thirteen engineered these to be ultra low profile, light weight, impact resistant, and strong. Our almost unbreakable composite platform has 11 replaceable steel pins per side providing rebuildable and tunable bite. Forged, heat-treated chromoly spindles with DU bushings and cartridge bearings allow for a minimal profile platform with the largest spindle diameter and the highest strength possible. Weight: 392g (pair) Material: Nylon-injected Plastic Stack Height: 16mm Concave: Yes Pins: 21 pins, fully-replaceable Build: Inboard bushing, with two outboard bearings

e*thirteen's Plus pedal features a lightweight aluminum pedal body and 22 traction pins. - Lightweight aluminum pedal body - 22 traction pins - 9/16"

- Extended range aluminum cog for those wanting 1x10 with a full range of gears - Only fits Shimano XT/XTR 11-36t (M771/M980) or SRAM X5/X7/X9/X0 11-36t 10sp cassettes (not compatible with 2011 and older SRAM derailleurs) - Requires removal of the 17T or 15T cog and spacer from existing cassette - Longer B-screw (sold separately) only needed for about 50% of Shimano derailleurs - May require a longer 10sp chain. Very tight fit on Stans 330 rear hub splines - Designed and manufactured in the USA from 7075-T6 aluminum alloy

Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench

Flat head screws from Wheels Manufacturing.

Bulk packaged, corrosion resistant stainless steel fasteners.

Flat head screws from Wheels Manufacturing.

Flat head screws from Wheels Manufacturing.

Flat head screws from Wheels Manufacturing.

Flat head screws from Wheels Manufacturing.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Thin, durable clear chainstay protector with extra-strong adhesive. - Overall length - 10.375

Thin, durable clear chainstay protector with extra-strong adhesive. - Overall length - 10.375

Replacement M6 Short Nut/Bolt Set for Wheels Mfg. derailleur hangers. - Custom M6 short chainring bolt style fastener - Use with 4mm hex wrench - Length of bolt: 6.4mm under head - Length of Nut: 3.5mm (under head), 5.2mm (overall)

Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.

Loose ball headset bearing retainers. - Grade 300 bearings

Derailleur shims for adapting front derailleur clamps to a different sized frame seat tube. - Derailleur = the size of the clamp on the front derailleur you have - Frame = the size of the seat tube the derailleur plus shim will fit

Derailleur shims for adapting front derailleur clamps to a different sized frame seat tube. - Derailleur = the size of the clamp on the front derailleur you have - Frame = the size of the seat tube the derailleur plus shim will fit

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 16 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

Grade 300 retainer bearings for headset and bottom bracket service 1/4" ball diameter 7 balls per retainer Grade 300 Bearings 10 Retainers/Bag

Grade 300 retainer bearings for headset and bottom bracket service 1/4" ball diameter 9 balls per retainer Grade 300 Bearings 10 Retainers/Bag

Grade 300 retainer bearings for headset and bottom bracket service 3/16" ball diameter 7 balls per retainer Grade 300 Bearings 10 Retainers/Bag

Corrosion resistant stainless steel washers. - Bottle of 100 - Stainless steel

M8 Bolt for DROPOUT-192, DROPOUT-275, DROPOUT-276 - Threads: M8x0.75 - Length Under Head: 1.110-inch - Head Diameter: 0.415-inch - Replaces Syntace X-12 Typ I screw - Sold Individually - Made in the USA

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.